The biggest difference of Terminal row and Terminal block is the use of modular fixture, according to engineering parameters needs to determine its type, large apertures in the wire connections in a variety of PLC control to fully play. Common classification system on the market today, there are two, one of which is by digit terminal can be divided into 2-bit, 5-bit, 10-bit, and so on; another was based on its current capacity is divided into 10A, 30A, and so on.

PLC application in common construction generally, there is no output devices directly connected with it, and multiple inputs and outputs of the PLC terminal common a COM port, or in a Terminal uplink Jie of several or even a dozen wires, so Terminal appeared to address this issue. Terminal coding echo methods are used to label Terminal wiring, so that both can do it orderly, secure connection wires.

Elinker common double-row terminal description:

The structure LW Series products is simple, intuitive and secure the connection. The solder pin location and forms are variety, such as the middle position, edge position, double needle position, curved needle and solder wire hole. We provide 6.36, 7.62, 8.25, 9.52, 10.0, 11,0, 13.0 and other pitch. There are optional protective cover styles.

Elinker Terminal has always been committed to the high end of the market, has extensive experience in research and development and marketing of products, product customization services provided by the company at the same time, can provide customers with the best solution for everyone who comes to consult.