Terminal block in particular cases should be done via custom job requirements, the need to mold the reproduction, injection molding machine as the common terminal equipment, for its excellent quality of access to Terminal supplier approved unanimously. Its common application procedure is as follows: made of thermoplastic or thermosetting plastic mould plastic products of various shapes.

Due to the higher purchase cost of injection molding machine, so its daily maintenance is important, injection molding machine is now Elinker electric power on the common considerations listed before, I hope you can assist injection molding machine use safer and more efficient use of injection molding machine:

1. Injection molding machine before operation, check whether the electric control box, oil into the water, if the appliance gets wet, do not power on the system. Maintenance personnel will then turn to electrical components dry.
2. Injection molding machine before operation, check the supply voltage is in accordance with, generally should not exceed ± 6%.
3. Check the emergency stop, safety door switch is working. Verify whether the direction of rotation of the motor and pump.
4. Check the smooth flow of the cooling pipes are long, and the oil cooler and the cooling water jacket at the end of the tube into the cooling water.
5. Injection molding machines before you do, check various activity areas for oil, and add a little oil.
6. Turn on the electric, heating to the barrel sections. When the temperature reached when heat for a period of time, to make the machine temperature to stabilize. The soaking time varies depending on the type of equipment and raw materials required.
7. Add enough plastic in the hopper. According to the requirements of different plastic injection molding, some best of raw materials through the dry.
8. Cover heat shield on the barrel, you'll save energy and extend the life of hot laps and contactors.

Terminal production process in addition to injection molding machine, also use automatic lathes, precision grinding machines, tapping machines, tables, processing and Assembly equipment and other kinds of terminal processing equipment for Assembly. Elinker electric boasts an excellent Terminal production technology and scientific management, good quality terminal will take you to the product's expectations, welcome to consult the discussion!