Rotating type wiring Terminal, it including has tube set, tube set internal has metal conductor, metal conductor top Department has tip cone Department, tube set of top Department opened has horizontal throughout tube set of line slot, tube set of top Department thread connection has rotating hat, using Shi, will a root wire by tube set bottom insert and metal conductor bottom connection, will another a root wire through line slot, Rotary tight rotating hat make metal conductor of tip cone Department thorn broken wire connection guide pass, such on completed two root wire of connection. Elinker Electric below will share with you the two most common rotating terminals.

1, for the explosion-proof wiring terminal operating columns rotated, is used to tap power from the explosion-proof operation column lines. It mainly to solve the existing technology for explosion-proof junction box-column size small, and multi-channel power cord wiring terminal access, out, in Setup, maintenance inconvenient questions. Their main technical features are: Guide to install wiring terminal screws fixed to the Rails on an axis, Rails is seated with the axis of the shaft and is positioned to connect on the shell. Wiring Terminal 45 degree angle turning up and down respectively, tapered apertures exposed, installation, maintenance is very convenient.

2, and a rotating transformer of wiring Terminal and manufacturing method, wiring terminal end connection rotating transformer of winding leads line, another end connection received plug-in leads line, wiring terminal connection winding introduction outlet of end stopped leaving "c" type, by in the end Shang at least has a arc concave, by in arc concave at least along winding direction Shang and by in stopped leaving "c" type of end of appearance surface junction sleek transition, by in arc concave used to around received by in rotating transformer of winding introduction outlet. Through the technology programme, rotating transformer terminal blocks connected lead wire into one end of the winding section leaving it "c"-type structure, and, in the end, there is at least one curved concave, leader of rotating transformer winding around, avoiding rotating the windings of a transformer lead wire stress caused by edges and thus vulnerable to fracture problems. While the entire Terminal made of sheet metal, compared to the square connector of the existing, material savings, lower production costs.

Elinker Electric  is a set research, production, sales Yu one of wiring Terminal suppliers, main production circuit board wiring Terminal, track type wiring Terminal, dozens of species series, company adhere to "provides high quality products, constantly innovation technology, cater to customer of needs, competition in the common development" of concept, followed "seriously of listening, widely of discussion, detailed of research, full of programme" of purposes, towards to reasonable of recommends and best of service to meet customer Supreme of requirements.