Small terminals and terminal blocks with a fixed ear using a screw or a fixed approximate way, to complete the installation on the terminals with a fixed pin will be fully into the mounting plate pin hole or aluminum rail.

Side of the wiring

Small side wiring terminals and terminal blocks with CAGE CLAMP ? unit (the CAGE CLAMP?) For conductor cross-sectional area up to 4 mm2, may need to select a variety of installation methods: with fixed lugs or fixed pin, unilateral or dual measurement push the button. With a fixed ear to the use of screws or approximate way of fixed terminals with a fixed pin will be fully into the mounting plate pin holes or aluminum rails to complete the installation. The products are widely used in the junction box and compact distribution cabinet.

Front connection

The front line small terminal and terminal blocks for conductor cross-sectional area 0.08-2.5mm2, rated voltage of 800V. CAGE CLAMP ? units, each potential can connect up to four wire. Selectable with a fixed pin in the base plate installation or with fixed ear.