Product advantages

1) excellent optical properties : foreign product insertion loss in 0.5dB, with K star type optical fiber connector insertion loss is positioned on the insertion loss of less than or equal to 0.3dB product 0.3 dB, all the products in the factory all tested, only the insertion loss of less than or equal to 0.3dB product is considered to be the insertion loss of qualified, can be delivery. Strict quality control to ensure that the same star K type optical fiber connector excellent optical properties.

2) easy installation performance: a simple assembly is the star with the K type optical fiber connector user acceptance as important reason, abandoned professional, complex fixture, easy to learn, and even can realize manual operation time less than 30 seconds. Manual operation, operation time less than 30 seconds manual operation time is less than 30

3) repeat performance: repeat times reaches above 100 times. When cutting a good fiber penetration in the ferrule, absolutely do not occur because the optical fiber encountered parts and parts of the surface material scratching and cause fiber impurities, so it can be really really is a hundred times continue. Now hundreds of times in

4) reliable tensile properties: a good environment and mechanical properties. Star with the fast connection has Theil certification, its mechanical properties and ring habitat properties all meet the requirements of GR326. Not only that, taking into account the user end of the special, star with the fastest access to the tensile test inspection even beyond the requirements of the industry the two times, achieve the online test conditions, the tension reaches 40N rally to pull of 40N to 40N, insertion loss constant.

5) construction convenience: This product is the fastest site connector the fastest site connector equipped with tools, construction site at least connector tool field connector, the fastest site connector tool minimal site connector field termination requires only a simple tool, it can finish the peeling, cutting set the length of the operation.