Pluggable terminal blocks is the most common kind, simple structure, easy to use, occupies a higher market in the automation industry. This type of wiring terminals and terminals are used, there is no strict difference only terminals are commonly used in power distribution box more convenient wiring inside, that the power is generally small (2-15). Elinker Electric as the professional Terminal Services in the industry, specializing in the production of pluggable terminal block for more than 15 years of experience, and now the series categories are described below:

(1) the pluggable terminals: LC LZ Series supporting the use of LC plugs, LZ-the socket;
LC Series:
Lc1:90 degrees angle design; LC2: is divided into a,, and b two small class, window and card angle direction consistent for a,, instead is for B;LC3:180 ° angle design; lc4:45 degrees angle design, common application Yu following electrical protection and the automation industry; LC5:180 degrees angle design, for instrument industry; lc6: and LC3 phase similar; lc7:90 degrees angle design; lc8:180 degrees angle design; LC9: double into line structure; lc10: Can composition wear Wall Terminal mutual supporting using (cases: LZ5X,lc1); lc11: and lc10 similar, difference is the series used spring type into line; LC12: and called Board on board wiring Terminal, without wire connection; lc13: two into a out; lc14:LC1 upgrade version, performance and LC system, increased screws solid positioning; lc15: tie guide using; LC16, and lc17, and lc18, and lc19:U type design; lc20: anti-wrong plug design, Ensure the rigour of product use.

LC Series frequently asked questions:
Slide 1 and screws: easily lead to temperature increases over current, which pushes the screws slide;
2, the use of environment accidents can cause Terminal materials aging;
3, LC series of fuzzy concepts a and b;
4, plating layer: clip galvanised material choices directly affect the performance of the connection, conventional nickel plated or gold plated, silver, can effectively increase the efficiency of signal transmission.

LZ Series:
Products are divided into a straight pin (v), bent (r); open (k), close (); ear (m)
Lz1 series: single-row design; lz2:45 degrees; the lz3: double: parallel (h) and double (t) lz4: vertically with the PCB Board; mainly used in instrument industry; the LZ5: through-wall Terminal (example: lz5x, lc10 and LC1); LZ6: use with the LC1, mainly for the wire and cable industry.

LZ Series frequently asked questions:
1, solid welding stitch: industry standards: 4N
2, curvature: bent in the product greater than 12P be considered, either due to a crisp or softer material raw material;
3, electroplating questions: main materials for Tin, cons: subject to time restrictions;
Common types of Tin in the industry: Tin Tin, mists (also known as stannous), tin coating determines the ability of the product to the amount of soldering;
4, color: choose not to plain material.