Precision equipment needs stable signal output, but how can we ensure stability of the input and output signals? Here spoke of common industrial connector-terminal blocks, terminal strip wiring accessories as a signal, can provide needed functionality for fieldbus, a few days ago, Elinker collaboration with a fieldbus control system, the successful completion of the successful trial operation of the system. After partner to our pluggable terminal blocks attach certain says will strengthen the cooperation between the two firms, and Elinker products are proven.
CANopen is a is used in a network of high-level communication protocols, its agreement to achieve above the network layer of the OSI model, widely application in control field, their common structures include communication protocols and equipment agreements, often referred to as field bus.
Terminal system is used for swift electrical-pluggable Terminal, attached to the circuit board terminals (also known as PCB Terminal), and the model is: LC6-5.0/5.08, which represents the spacing LC6 series 5.0 or 5.08 per cent of terminal blocks. The series of the most important features available with screw fixing on the side of the spring Plug and corresponding socket with reinforcing screws used may constitute a connection. Bus control system in this advantage to avoid instability caused by the vibration of the wire connection problem.
In addition to this series, Elinker electric can provide a different set of product solutions, including: spring, fence-style, straight welding and rail terminals, and so on. A full range of models are available to meet every customer's most urgent needs, and if you have any questions, we will be most enthusiastic attitude for you!
Industry Tip: CANopen device capabilities
Communications Unit and other modules need to communicate on the network communication protocols. Start and reset of the device by a state machine (state machine). State machine includes the following States: Initialization, Pre-operational, Operational and Stopped. When it receives a network management (NMT) communication object, the status may change to the corresponding State. Object dictionary (Object Dictionary) is a 16-bit index (the Index) of variable arrays. Each variable can (but not necessarily) with 8-bit subindex (a Subindex). Variables can be used to adjust the device configuration or output of the corresponding data measurements of equipment or device. When the state machine is set to after the operational and equipment application (application) some will achieve the desired function. This part can be adjusted by the variables in the object dictionary set, data transmitted or received by the communications layer.