LG terminal blocks to become an important part of the printed circuit board. Common features include: simple structure, small size, easy to wire, wire and without injury. Straight solder terminal using the principle of clamping body movements, leg and the line is divided into two parts, make sure that when you tighten the screws, distance will not solder to solder and injury; shell strong and secure, stitch precision.

Made of high temperature resistant insulating material nylon (PA).

Most of the insulated shell is made from PA66 plastic. It has a compressive strength of up to 600 kV/cm, density of 1. 15g/cm3。 Melting point of 252 degrees Celsius. Brittleness temperature-40 ℃. Thermal decomposition temperature greater than 350 degrees centigrade. Continuous heat-resistant 80-120, balancing water absorption rate of 2. 5%. Resistant to acids, alkalis and most aqueous solutions of inorganic salts, alkyl halide, hydrocarbons, esters, ketones, such as corrosion, but soluble in polar solvents such as phenol and carboxylic acid. Has excellent wear resistance, lubricity, high mechanical strength. Gasoline, oil, grease, aliphatic and aromatic compounds, and chlorine compounds, esters, methyl ketone and alcohol does not attack the materials.

One line box design, avoiding the press package defects in quality control difficult, easy slide, improves working efficiency.

Plating: uses matte tin (stannous), bright Terminal plating Tin material.

Pros: 1, beautiful 2, and longer than the ordinary solder oxidation 2-3; 3, strong increase Terminal plating adhesion; 4, enhance conductivity; 5, suitable for wave soldering, reflow soldering and welding methods.