Phoenix - the inventor of the wall terminal, will be applied to the ranks of different connection technologies through walls terminals: screw connection type, connection type and spring-line bolted through the wall terminal, lead wire for the internal equipment provides more selection. Moreover, the new terminal through the wall to create a new series also wear standard panel mounting, the user can freely choose reinforcement method: screws, rivets and fixed law bar.
  
       Elinker wall screw terminal connector technology, insulation material is PA66 (flammability rating: UL94, V-0), the connector uses high-quality conductive metallic material.
  

 
       Elinker wall type terminals can be mounted side by side on equal thickness of 1mm to 10mm panel thickness adjustment panel can automatically compensate for distance, the composition of an arbitrary number of poles of the terminal block, and can be used to increase the air gap separating plate and creepage distances . Does not require any tools can be wall-type terminals securely mounted in a rectangular hole on the panel aside, extremely easy to install.
  
       Product Features:
       1, shell snap connection, no cracks
       2, diversification installation, more firmly:
            - Optional installation method column
            - Each one available through the locking screw
            - Internal and external mounting member can be rotated 180 degrees to achieve
       3, all models can provide connecting pin products
       4, the creepage distance can be increased by a small septum, thereby increasing the voltage level