Since 2014 Elinker company sales reports so far has suggested that relative to the terminal block product demand increased last year, Elinker terminal markets in the next 5 years the average annual increase is expected to remain at around 15%, about 7%, significantly higher than the world market growth is expected, China will be one of the terminals of the world's most promising markets.
Elinker UK wiring Terminal and said WUK Terminal, UK wiring Terminal very common of Terminal, UK wiring Terminal is to convenient wire of connection and application of, it actually is a seal in insulated plastic inside of metal tablets, ends are has hole can insert wire, has screws for tight solid or release, like two root wire, sometimes needs connection, sometimes and needs disconnect, this thing on can with Terminal put they connection up, and can at any time disconnect, and without put they welding up or winding in together, Very easy and fast. And will fit a large number of wire interconnection, the electric industry will have a dedicated Terminal, terminal box, it is Terminal, single layer, double layer, current, voltage, common, and can be broken, and so on. Must be of the crimp area in order to guarantee reliable access, as well as the guarantee of enough current.
General specifications of all UK series universal terminal blocks can be used to meet the requirements of EN50019 standard EEXe field. Corresponding Ex chartered component of explosion-proof certification, can be found under the terminal data, and smaller overall dimensions similar to the smaller sister model of the wire, wire cross section is larger than the dimension of the 6mm2 Terminal has been optimized.
General UK series products have the following characteristics:
1. terminals have a common mounting pin can be installed on a NS35 and g u-rail-rail NS32.
2. blind rivet screw pilot holes to ensure ideal screwdriver operations.
3. for multiple-section level terminals equipped with uniform accessories, such as side panels, grouping separators, and so on.
4. potential distribution via an access Terminal Central fixed bridge-bridge or the sides of the cavity insert wiring plug connector to achieve.
5. regular uniform appearance of Terminal ground terminal and n line slider breaking Terminal
6. using marking systems ZB ... ... Unified identity can be achieved.
Typical characteristics of UK products:
1, terminals can be installed in u-type and g-type rail;
2, with a full range of accessories, such as: documents, grouping separators
3, equipped with outer earthing terminal;
4, resolves two-layer wiring, electric potential distribution, current loop test and other special terminals.