Elinker Electric now believes that equipment and systems must be more in line with the customer in mind. This requires the manufacturer has a careful consideration scheme, can change for the customer's special requirements and subsequent leave enough space. For the electrical connection, also put forward higher requirements, requirements for connection technique is safe, simple operation process, size small, marking method quickly and flexible connection. Because on the one hand, the increase in the application of function, leads to the need for wiring position more, but on the other hand, the possibility of more simple mode of operation or prefabricated cable.

 

The labeled terminals, standardization is an effective way to industry standard is the terminal to improve production efficiency. For example, set all the 6mm2 below the terminal height and mark position are the same, the 10mm2 and 16mm2 terminals of the height and the mark position is the same, so you can use the same tags for marking, so that you can quickly, save into local printing tags by software and TP 298 thermal transfer printer. The TP 298 printer has terminal row and labeled data from the software, then the label roll strip printed. By this way, marking the rail mounted terminal row can be completed in print in the twinkling of an eye. In the bar the medium this kind of big area, to mark and group marking up to 3 rows, which can accurately correspond with the wiring unit. Terminal technology is facing the dual test application and customer requirements, a leading expert on the terminal Elinker Electric said, the new year arrival terminal enterprises should not only continue to progress in the product technology, with the expansion of the terminal application field, thinking about marketing strategy will be gradually put on the schedule.

 

Elinker Electric enterprise at a terminal miniaturization design, using a single wire and with cold pressed joint multi wire can be directly inserted into the connection unit, and for not doing the thread processing wire strands of wire or thin, can be used traditional methods, using a screwdriver to open the terminal connection unit. If the terminal, the wire holes are inclined 15 degrees, so that the operator has a large space to hold the wire. Can also be used in marker without it breaking, and through the plug way support prefabricated wire harness.