Concept paper:
Terminal connectors (FFC) can choose the number and spacing of conductors, makes it easier for on-line, greatly reducing the volume of electronic products, reduce production costs, increase productivity, and is best suited to move parts to the motherboard, PCB Board PCB Board, small appliances for data transmission cables between uses.
Model articles:
A-connections at both ends and stiffening plates affixed to the plastic insulation on a piece of paper;
Type b: reinforcement plate cross pasted directly on the insulation adhesive tape;
C-reinforcement plate pasted directly on the conductor on both ends;
D-type: cross reinforcement plate pasted directly on the conductor on both ends;
E-type: stiffening plates affixed to insulating adhesive tape on one end and the other end directly solder;
F type: justified stiffening plates affixed directly on the insulating adhesive tape, half-split;
G type: solder directly at both ends.
Technical parameters of article:
Number n of conductors: copper cable number of conductors in the cable;
Pitch p: the distance between two adjacent conductors centerline;
M margins: the outermost edge of a Center conductor wire to wire distance between:
TP-wide spacing: the external distance between the Centre lines of two conductor, TP=P* (N-1);
Total width w: traversing the distance between two edges, W=P* (N+1);
Total length TL: both ends of the cable distance;
Insert thickness of TT: the line thickness of the two connecting port.
Application:
Terminal should be used for a variety of print head printer connection to the motherboard, plotter, scanner, photocopier, sound system, LCD electrical equipment, fax machines, a variety of signal transmission products such as DVD players and Board to Board connection.