A few days ago, Elinker large domestic electric ovens and electric companies to cooperate, we offer accessories for TB terminal block line. This terminal uses significantly improves the safe operation of industrial oven. The JHY1 terminal for high temperature performance is more prominent, internationally made of heat-resistant materials to build the Terminal, under high temperature operation of the oven is still able to maintain a normal working, this advantage is what clients value.
JHY1 series Terminal to their common advantage: high temperature resistance, corrosion resistance, good conductivity and by the majority of customers, in addition the series terminals can effectively prevent the screws from loosening. For Terminal metalwork using copper materials, terminals, can work under the temperature of 100-150 degrees Celsius, remain flexible to-40 degrees Celsius, at low temperature.
Industrial oven usage guidelines:
General Electric vacuum oven used to heat the vacuum chamber wall, followed by wall radiation heating the workpiece-oriented manner. In this mode, the temperature control instrument temperature sensor outdoor wall can run in a vacuum. Sensors can also accept heat convection, conduction, and radiation. Glass rod thermometer in the vacuum chamber can only accept the radiant heat, due to glass rod blackness could not achieve 1, a significant proportion of radiant heat is refracted, so glass rod thermometer reflects the temperature value must be lower than the temperature readings of the meter.
In addition, 200 ℃ when the condition meter temperature reading with the glass rod thermometer readings between the difference of 30 ° c or less is normal. If the temperature control instrument temperature sensors placed in the vacuum chamber, glass rod thermometer the temperature value with the difference between the temperature readings of the instrument may be appropriately smaller, but could not be eliminated, and vacuum chamber sealing reliability adds a potentially unreliable links. If you from practical point of view does not want to see the differences, you can display the correct function of the temperature control instrument-specific solution.