Wiring Terminal is a terminal block with one or more mutually insulated component. Its original name of "junction", as parts of electrical equipment products, its main function and the internal wiring of electrical equipment, cable and connection between the inner and outer conductors. To ensure that the equipment quality of the product, at the time of design and manufacture selection, Elinker electric reminds technical requirements need to focus on the following several points:

1, take an insulated open flame before combustion, fire away, check whether the insulating parts of the flame can extinguish in the 30s, self-extinguishing, notes Terminal row of flame retardant.

2, for terminals using polycarbonate manufacturing line, desirable before using one or a few pieces of insulation impregnating three minutes into a container filled with carbon tetrachloride, no cracks insulation stress is very small, use does not appear in the issue.

3, row of terminals and conductors connections, generally allows only one wire on each terminal, when you need to spend more time with the lead wires, should select contact type wiring Terminal.

4, combination type terminal blocks in line about cabinet installation, shall generally be insulated conductive parts above the horizontal mounting, mounting rail and high Groove at the bottom.

"Your butler of connectors" is the concept of Elinker Electric. For all your connector needs we provide worry-free service. We have capabilities from product design to mold development, from parts forming to finished product assembly, and quality control throughout the full range of process. Our service for your needs will be showed everywhere.