"Your butler of connectors" is the concept of Elinker Electric. For all your connector needs we provide worry-free service. We have capabilities from product design to mold development, from parts forming to finished product assembly, and quality control throughout the full range of process. Our service for your needs will be showed everywhere.Then,I will show you Elinker ELectric's Other types of terminal blocks:

JDE Series Description:

The overall material is copper, to ensure reliable to the ground. The surfaces are nickel-plated. JDG have A, B, C, D four models to meet the needs of customers. C-type can be customized according to special specifications.

JH9 Series Description:

JH9 series mounting rail calculation (Unit: mm) mounting rail length (L) = terminal * terminal thickness + thickness + partitions on both sides of mounting position. N section of 1.5m㎡ section of the base type terminal block + 2 + 1.5G partition on both sides of mounting position. N section of the way for other specifications: (N-2) section of the base section 2G-type terminal blocks +1 end partitions + installed on both sides bit. Various types of models are equipped with a transparent protective cover.

TB1 series products description:

It is same with the original installation size of TB. The 1.5m㎡ products of TB1 series are with 2-12 pins. 2.5m ㎡ products have 2-20 pins. There is a marked line  in the middle of wiring. The protective cover is designed to interspersed type and withhold type,to increase the corrosion column height and creepage distance.

TC2 series products description:

TC2 series use PC as the insulator. It is impact resistance, aging, and can be used in high temperature environments. With the modular structure it can be freely combined.
With the TC2-200/300 dual installation, it can be installed both with rail mounting and screws. The transparent protective cover PC is safe and beautiful.

Unfinished, to be continued......