Pressure terminal connected profile analyzer, to analyze the internal quality of the crimping process terminals, the terminal profile, check the terminal profile crimp density: the wire core is deformed crimp burr qualified conductor cross-section of all the singlet wasirregular polygon, the conductor and the terminal connecting parts, in-line with singlet should be no significant gaps between the parts of the terminal crimping should wrap all of the conductor.

Vehicle wiring harness should be consistent: Low voltage harness QC/T29106-2004 automotive technical conditions.

(1) provides a test harness size standard.

(2) provides for the wire bundles in the materials and components meet the performance requirements.

(3) provides for the connection of the terminals and wiring harness and connections shall comply with the requirements.

(4) for the terminal and the wiring harness connection point shall comply with the requirements.

(5) sealing plugs should not damage the crimp. Between the wire and seal plug, sealing plug and sheath should not be a visual gap.

(6) wiring harness bandage should be tight, even, should not be loose. Use of protective casing, bending phenomenon of displacement and impact of the wiring harness.

(7) wiring harness wires and parts should be fitted correctly, there should be no dislocation, the terminal should emerge in the sheath.

(8) wiring harness line guide pass rate of 100%, no short circuit, the wrong way phenomenon.

(9) wiring harness need to be high resistance, low temperature, humidity cycling performance test; resistant to vibration test; salt spray resistance test; industrial solvent resistance performance test.

Elinker developed a harness terminal for rapid detection of the analyzer. Sample test harness for wiring harness production process. The reliability of the quality of the cable harness production line, by the favor of strong protection of the public business.