Product Description: the product description this series product is our company low-frequency connector in a big class, most of the products by DIN41612, DIN41617and MIL-C-55302standards development, production products reasonable structure, reliable contact, convenient connection, high universality, is electronic equipment connected to printed circuit board connector element is to realize the ideal, compact equipment, wiring, reasonable legislative body continue to be more flexible connector. The typical products are CH, CH2, CH3, CH4, CH5, CH6, CH16, CY, CYB, CYE, CE1, CE3, CE4, CE5, CE8, CE9, CE11, CE13, CE14, CE15 series.

CE series connector utilizes a wire spring hole as a negative contact, so that the products of high reliability, vibration resistance, shock resistance, small insertion force printed circuit board connector, is the preferred product. Wire spring hole is made of multiple strands of beryllium bronze wire are distributed on the inner wall of the metal inner tube, both ends of a two metal sleeve fixed tension, metal wire and the inner cylinder axis intersecting a inclination angle theta, form an envelope surface, namely" leaves the rotational hyperboloid", due to its large diameter at both ends, middle and small diameter, when the steel pin is inserted, by elastic metal wire wrap. Each wire contact pressure is not great, so this Jack separation force is small, little abrasion, and the contact surface smooth, with fine indeed, the tolerance of various mechanical action.