Connector, namely CONNECTOR. Also known as domestic connector, plug and socket. Generally refers to the electric connector. The connection of two active components of the device, or the signal transmission current.

The connector is our electronic engineering and technical personnel in regular contact with a component. Its role is very simple: within a circuit is blocked or isolated circuit, served as a bridge of communication, so that the current flow, so that the circuit realization of a predetermined function. Connector of electronic equipment is an indispensable component in the current path, observation, you can always find one or more connectors. Connector form and structure of the myriads of changes, as application object, frequency, power, the application environment is different, there are different forms of connector. For example, the court lights connector and a hard disk drive connector, and the connector to ignite the rocket is not the same. But no matter what kind of connector, to ensure smooth continuous and reliable circulation current. It refers to, the connector is connected with not only the current, in optoelectronic technology rapid development today, optical system, signal transmission carrier is light, glass and plastic instead of the common conductor in the circuit, but light signaling pathways also use connector, their role and the circuit connector.

Compression type connector for a hard wire cable to an equipment port compression connector body, formed by a coupling nut two members coupled to each other. A port-side member houses a conductive pin and associated elements, while a cable-side member through a compression fit is attached to the cable. With this configuration, when the maintenance of equipment, can not affect the cable and the cable side connection between components are removed from the port-side member cable-side member and attached cable. The port-side member is then disconnected from the equipment port. In the maintenance of the equipment, the port-side member is reconnected to the equipment port, after which the cable-side member is reconnected to the port-side member, thus reduce the cut and prepare a new length of cable for connection to the equipment port need.